Other measuring tools

• AT-9950DIS/9950T: RPM (RPM 2 Stroke or 4 Stroke mode active) measurements for automotive engines with the Inductive Pickup
• AT-950B: RPM measurement for automotive engines with the inductive Pickup
• AT-950A: RPM measurements for automotive engines wtih the test leads
• Read pulse duty cycle and dwell angle for electronic fuel injection feedback carburetors and ignition

Accessories:

• 9V Battery, Rubber holster and Inductive pick-up(except AT-950A)

Automotive Current Testers CF-02

Measuring adaptor for easy current detection and measurement of 200mA/20A/30A currents on blade-type be connected to any commercially available by a 4mm-banana plug/pin plug

Features:

• Large 31/2 LCD display with bar graph
• Peak hold and Data hold function (СF-08)
• 30 A measurement greater than the current alarm sounds will be issued (CF-08)
• DCA zero for accurate measurment
• Unit with Max/Mini-Blade plug

Professional Laser Distance Meter LDM-35S/65S/80S

These professional Laser Distance Meters are designed to provide special users a high accuracy, one person distance measuring and estimating tool to measure remote and difficult to reach. The compact and handheld design for indoor applications. Shortcut keys for addition, subtraction, Pythagoras, area and volume calculation make measuring fast and very reliable. The last 50 measurements are also stored

Features:

• Area, Volume Calculations
• Indirect measurement using Pythagoras
• Angle measurement using tilt sensor(± 65°)
• Addition/Subtraction
• Continuous Measurement
• Min/Max Distance Tracking
• Display illumination and 4-line display.
• Buzzer indication

Professional Laser Distance Meter LDM-35/65/100

These professional Laser Distance Meters are designed to give special users a high accuracy, one person distance measuring and estimating tool to measure remote and difficult reaching places. The compact and handheld design for indoor applications. Shortcut keys for addition, subtraction, Pythagoras, area and volume calculation make measuring fast and very reliable. The last 20 measurements are also stored

Features:

• Area, Volume Calculations
• Indirect measurement using Pythagoras
• Addition/Subtraction
• Continuous Measurement
• Min/Max Distance Tracking
• Display illumination and multi-line display
• Buzzer indication

Professional Laser Distance Meter iLDM-150

The professional Laser Distance Meter is designed to give special users a high accuracy, one person distance measuring and estimating tool to measure remote and difficult reaching places. The compact and handheld design for indoor applications. Shortcut keys for addition, subtraction, Pythagoras, area and volume calculation make measuring fast and very reliable. The last 20 measurements are also stored. Meterbox iLDM software & cloud server support to transfer the measured data to the customer's smartphone for edit and storage

Features:

• Area, Volume Calculations
• Indirect measurement using Pythagoras
• Indirect measurement using tilt sensor
• Angle measurement using tilt sensor(± 65°)
• Addition/Subtraction
• Continuous Measurement
• Min/Max Distance Tracking
• Timer (self-triggering)
• Laser continuous
• Stake out function
• Display illumination and multi-line display
• Multifunctional endpiece
• Tripod thread
• Beep indication
• Bluetooth with Apple iPod/iPhone support
• Bluetooth with SPP support
• Meterbox iLDM & cloud service

Specifications:

• Measuring Range 0.05 to 70 m(0.15 ft to 229 ft)
• Measuring accuracy(2σ) Typically: ±1.5 mm(± 0.06 in)
• Measuring units m,in,ft
• Laser Class Class II 635 nm, < 1mW
• Smallest unit displayed 1mm
• Tilt sensor Measuring range ± 65°
• Range of bluetooth 10m
• Dust Protect/Splash proof IP 54
• History measurement records 20
• Keyboard Type Super Soft-Touch (Long life)
• Operating Temperature 0°C to 40°C(32°F to 104°F)
• Storage Temperature -10°C to 60°C(14°F to 140°F)
• Battery Life Up to 8,000 measurements
• Batteries Type AA 2 x 1.5V
• Auto laser switch-off after 30 seconds
• Auto instrument switch-off after 3 min

Accessories:

• 2 x 1.5V AA batteries and gift box with carrying case

DT-82 Mini Anemometer

Specification

• Function Range Accuracy
• m/s(meter per second) 0.40~25.00 ±3.5% ±0.20m/s
• ft/min(feet per minute) 80~2980 ±3.5% ±40ft/min
• km/h(kilometers per hour) 1.4~54.0 ±3.5% ±0.8km/h
• MPH(miles per hour) 0.9~33.0 ±3.5% ±0.4MPH
• Knots(nautical miles per hour) 0.8~29.0 ±3.5% ±0.4knots

DT-83 Mini Temperature & Humidity Meter

Specification

• Function Range Resolution Accuracy
• Temperature -20 to 60ºC/-4 to 140ºF 0.1ºC/ºF ±0.5ºC/0.9ºF
• Humidity 0 to 100%RH 0.1%RH ±3%RH

Humidity & Temperature Meters DT-615/625/635/616CT

625 is digital Humidity & Temperature Meter with Wet Bulb Temperature & Dew Point temperature, which has been designed to combine the functions of Humidity Meter, Temperature Meter, Wet Bulb Temperature and Dew point temperature. It is an ideal Humidity & Temperature Meter with scores of practical applications for laboratorial, industrial, Engineer and professional use. 615 is Humidity meter with Air and type K thermocouple thermometer.

• Large, easy-to-read backlit LCD with dual display
• Fast Response Time: 10s (90% at 25ºC still air)
• 2% High Accuracy (625)
• Dew Point Temperature (-30ºC~100ºC/-22ºF~199ºF) (625)
• Wet Bulb Temperature ( 0ºC~80ºC/32ºF~176ºF) (625)
• Resolution 0.1%RH, 0.1ºC/0.1ºF
• Max/Min Hold and Data Hold Function (625)
• Microprocessor-based Design (625)
• Dual Display Temperature & Humidity

CMM/CFM Thermo-Anemometers with IR temperature DT-8893/8894

CFM/CMM Thermo-Anemometer with built-in non-contact IR Thermometer measure remote surface temperature to 500ºC (932ºF) and 30:1 distance to spot ratio

Features:

• Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature
• Easy to set Area dimensions (cm2) are stored in the meter’s internal memory for the next power on
• Resolution of 0.01m/sec
• 20 points average for Air Flow
• Super large (9999 counts) LCD Backlit Display
• 3% velocity accuracy via low friction 2.83"D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable
• Complete with vane sensor with 3.9ft (120cm) cable, 9V battery, and protective rubber holster
• MAX/MIN, Data Hold functions

Accessories :

• 9V battery, USB cable, software,
• Anemo probe and Gift box with carrying case

CFM/CMM Thermo-Anemometer with IR temperature DT-618/618B/619/620

CFM/CMM Thermo-Anemometer with built-in non-contact IR Thermometer measures remote surface temperature to 280ºC (536ºF) and 8:1 distance to spot ratio

• Multifunction Air Velocity Meter with wide temperature range (618/618B)
• CFM/CMM Thermo-Anemometer (619)
• CFM/CMM Thermo-Anemometer + InfraRed Thermometer (620)
• Max/Min/Avg value with relative time stamp (619/620)
• Low battery indication and Auto Power Off
• Display Air Flow (CFM/CMM), or Air Velocity plus Temperature simultaneously (619/620

Features:

• Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature(619/620)
• Easy to set Area dimensions (cm2) are stored in the meter´s internal memory for the next power on(619/620)
• Resolution of 0.01m/sec (619/620)
• 20 points average for Air Flow (619/620)
• Super large LCD Backlit Display(618/619/620)
• 3% velocity accuracy via low friction 2.83"D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable(619/620)
• Type K sensor for temperature measurements (618/618B)
• High Sensitive and Accurate

Radiation scanner DT-9501

9501 radiation scanner is a tested precision instrument, reliably measures not only γ rays, but α、β and X rays as well. It allows multifuctions such as dose accumulating, maximum recording, hand-operated store, data transfer to PC in realtime, data analysis etc. Low power consumption ensures that the testing data will be not lost for several years.

• Large LCD display
• High precision
• Internal memory
• Data evaluation by PC
• Low power consumption
• Bluetooth interface
• Date reset

DT-2G Microwave Leakage Detector/DT-3G Magnetic Field Meter

The 2G is a high sensitive product to detect the microwave accurately, even at a low volume the injury of the radiation of microwave. The 3G is capable of measuring the electromagnetic field radiation intensity that is produced from electric transmission equipment, power line, electric oven, air conditioner, refrigerator, computer monitor, video/audio device and so forth.

• Digital LCD display with white backlit
• Leakage volume in dangerous zone will sound beeping and a red lamp flashing(2G)
• Low leakage volume display for warning
• Max. hold function

Carbon Monoxide Meter CO-110

CO-110 Carbon Monoxide Meter detects the presence of carbon monoxide (CO) and measures concentrations between 1-1000 parts per million (PPM). The Meter indicates the presence of CO by a reading on the LCD and a beeper tone. The beeper function much like clicking of a Geiger counter:Above 200 PPM, the beeper sounds continuously with the concentration of CO. From 35 PPM to 200 PPM, the beeper sounds discontinuously with the concentration of CO.

Features:

• Digital LCD Display
• Auto/manual zero
• Memory for 10 complete data sets
• Record mode
• Red & Blue LED light and audible alarm
• High Accuracy, quick response
• Pocket size and easy to use
• Fast sampling
• Max Hold
• Data Hold
• Above 200 PPM, the beeper sounds continuously

Specifications:

• Operating temperature 0ºC to 50.0ºC
• Storage temperature -30ºC to 60.0ºC
• Operating humidity 0-90% relative humidity (non-condensing)
• Measurement Range 0 to 1000PPM
• Measurement Resolution 1PPM
• Accuracy ±5% or ±10PPM
• Warm up period Less than 2 seconds
• Battery 9V, NEDA 1604A or equivalent
• Sensor type Stabilized electrochemical Gas-specific (CO)
• Typical sensor life 3 years

Accessories :

• 3.6V battery and Gift box with carrying case

Sound Level Meters DT-8851/8852

8851/8852 Sound Level Meters are designed for noise project, quality control, illness prevention & cure and all kinds of environmental sounds measurements. It is applied to the sounds measurement at factory, school, office, traffic access and household etc.

Features:

• This unit confirms to the IEC61672-1 class 2 for Sound Level Meters
• MAX & MIN measurements
• Overrange display
• Underrange display
• A & C Weighting
• FAST & SLOW response
• Analog AC/DC outputs for connection to frequency analyzer or X-Y shaft recorder
• Datalogger function (8852)
• Adjustable Alarm-Levels (8852)
• Memory for 32700 readings (8852)

Accessories :

• Battery, screwdriver, audio plug, windscreen, software, USB cable, tripod and DC 9V power supply and gift box with carrying case

Sound Level Calibrator SC-05

Features:

• 94dB and 114dB Sound Calibration at 1kHz
• Accurate and simple to use
• Fits 1/2” diameter microphone

Accessories:

• 9V battery, Carrying case,1/2”Microphone
• Adaptor (optional) and Clamshell.

DT-85A/85C Mini Sound Level Meter

85A/85C Mini Sound level meter have a wide dynamic range from 35 to 130dB. They have different frequency weighting A and C to respond to human sense or machine monitoring purposes

DT-85A/85C Mini Sound Level Meter

85A/85C Mini Sound level meter have a wide dynamic range from 35 to 130dB. They have different frequency weighting A and C to respond to human sense or machine monitoring purposes

High Voltage Insulation Tester DT-6605

• Wide range measurements from 500V to 5000V and up to 60GΩ.
• Large 6000 counts digital display with bargraph and backlight.
• Polarization index measurement(PI).
• Auto ranging & Timer measurement function.
• Indication of output voltage and discharge voltage.
• Auto-discharge function and voltage output warning function.
• Auto power off and battery check.
• MAX/MIN, PEAK, Relative value & Data hold functions for DC/AC voltage measurments
• Safety standard IEC61010-1 CAT IV 600V

DT-902 Motor and Phase Rotation Indicator

The Motor and Phase Rotation Indicator is a handheld, battery-operated Instrument designed to detect the rotary field of three-phase system and determine motor-rotation direction

• Determine rotary field direction
• Non-contact rotary field indication
• Determine the motor connection
• Magnetic field detection

Features:

• Nominal voltage rotary direction 1V to 400V AC
• Nominal Voltage phase indirection 120V to 400V AC
• Frequency range 2 to 400Hz
• Test Current (per phase) < 3.5 mA
• Electrical safety DIN, VDE 0411, IEC61010 DIN;IEC61557-7/EN61557-7
• Protection level CATIII 600V
• Type of protection IP40
• Operating Altitude 2000m
• Operating temperature 0ºC to 40ºC